(New!) Welcome to the 33rd China International Hardware Fair, our booth number 5.1 T5-173
The stainless steel plate chain conveyor belt will cause breakage when it is improperly operated or stored. In mechanical operation, if the chain plate breaks, it will cause an accident. In normal operation, the state of the punching chain plate must be checked first to prevent the chain plate from breaking. The sealing of the industrial conveyor chain plate is not suitable, the chain plate is eccentric, the drive shaft is bent, and the sprocket swings.
Continue to use the stainless steel plate chain conveyor belt after serious wear; the sprocket wear exceeds the allowable range; the sleeve roller chain overhead wears, or the joint clamping direction is reversed; the hook chain is worn or reversed, which will cause the chain plate to fall off, break and disengage . In order to prevent this kind of failure, it is necessary to make the sprockets in the same transmission circuit in the same rotation plane in the same rotation plane, check the wear of the punching chain plate, repair and replace it in time, and often check the cotter pin of the joint of the conveying chain plate, if necessary time to replace;
Stainless steel plate chain conveyor belt?
The stainless steel plate chain conveyor belt also has a name called conveyor mesh belt. It is made of metal materials. According to different use environments, it can be processed with ordinary carbon steel materials, or customized with stainless steel materials, as well as galvanized iron wires. These materials are determined according to the actual application environment.
Large pitch chain manufacturer
Gears and Gear Mechanisms
Any toothed mechanical element, when it can use its teeth to continuously mesh with another toothed element, thereby transmitting motion to the latter, or receiving motion from the latter, becomes a gear.
2. Gear pair
A basic mechanism consisting of two meshing gears. The relative positions of the axes of the two gears remain unchanged, and each rotates around its own axis.
3. Parallel shaft gear pair
A gear pair with two axes parallel to each other.
4. Intersecting shaft gear pair
A gear pair where the two axes intersect.
5. Staggered shaft gear pair
A gear pair in which the two axes are not parallel or intersecting.
6. Gear train
Any combination of several gear pairs.
7. Planetary gear train
A gear mechanism composed of several coaxial components, at least one of which is a planet carrier on which one or more planetary moving gears are mounted.
a. Simple planetary gear train
A planetary gear train consisting of three coaxial members, of which there is only one planet carrier.
b. Differential gear train
A planetary gear train with two or more degrees of freedom.
c. Compound planetary gear train
A planetary gear train with more than one planet carrier.
8. Gear drive
A transmission method that uses gears to transmit motion.
Common sense of use of reducer
The second point is to pay attention to the daily maintenance of the reducer. Don't just use it or not maintain it. This is a taboo for the use of the reducer. How good the equipment is, if it is not maintained, its lifespan will be reduced by at least one third. Therefore, daily maintenance is particularly important. The daily maintenance of the reducer includes: the use and replacement of lubricating oil, checking whether the installation foundation, seals, drive shafts, etc. are normal, and the maintenance of important parts such as casing removal. The gearbox cleaning and maintenance machine uses the original oil supply and discharge system of the gearbox and the filtered old oil to realize the functions of cleaning the gearbox, quickly filtering the waste oil, and adding new oil. The operation process does not change the hardware facilities, does not Adding cleaning agent ensures the safe operation of the gearbox and prolongs its service life.
The third point is to pay attention to the maintenance of the reducer when it is out of use. When the reducer is out of use, the user should not ignore it, just like a car, it is no problem to drive every day, but if it is a year, regardless of whether it is exposed to the wind and the sun, if you want to drive it again, you must go to the auto repair shop first. went. When the reducer is idle, it is necessary to pay attention to the requirements of the manual, check and maintain it regularly, and use it again to ensure that it is ready to use when it is turned on, and there will be no unexpected failures.